While using any product, the most crucial aspect to keep into consideration is its relative specific features. Understanding the elements and their respective collaboration with the hardware and other products is significant to secure a smooth user experience. Oli Intelligence offers a wide range of Axis products with unique features and add-on products that can help one experience the utmost user experience. But, the question of upgrading axis products from time to time can be a bit tricky.
Many find the entire process tedious, especially when it’s about the up-gradation of Firmware on My Axis Camera. Here is the way to learn how to upgrade the firmware on my Axis Camera with FTP right from the most trusted and experienced company in this field, Oli International. Oli International has delivered a wide range of Axis products to many audiences with immense expertise in dealing with the consequences. The underlying guide states the step-by-step method to upgrade the Firmware on My Axis Product with FTP. But, before that, here are a few things to consider before you begin.
First, it’s crucial to install the unit on an Ethernet network using TCP/IP. Second, always remember to take note of all the application layouts and other settings before upgrading. These settings might get lost in the up-gradation process, and thus taking notes of these can save you.
The following are the steps for updating the firmware on My Axis Product.
It is important to note that if you upgrade the AXIS 2100 or 2120 network camera to a higher version, you must first install the 2.12 version. Further, disable the running application in the camera with the use of “Passive Mode”. It will help prevent the existing data.
Download the files of upgrades and save them on the hard drive. Go to the command prompt and the directory containing the Upgrade file and follow the steps stated below.
Use an FTP to the unit you want to upgrade from a command prompt by opening an FTP connection.
Log into the system as root. The default password for the root user is the same until and unless the user changes it. The default password is “pass”. To flash the unit, you must be logged in as a root user.
Type “bin” and press enter to change to the binary operation mode.
Type “hash” and press the enter key to start the flash process. It will help you track down the progress as well.
Type the command “put axis2100.bin flash_all” and press the enter key. Rename the file "axis2100.bin" to the name of the downloaded and decompressed file. Usually “2100_210.bin” or “axis2100.bin”.
Wait till the flash is loaded and finished. It can take up to ten minutes to complete the process. Once the process is done, your unit will restart automatically using the new firmware that you have downloaded. It indicates that your firmware is upgraded.
Reconfigure your settings as per your needs as they are set to default.
And this is how you can upgrade the firmware for My Axis Products and implement the changes. Oli International is the best place to below steps containing find all the Axis products and Axis Camera with advanced settings and re configurations.
0 Comments